Chesterton’s ARC FCS301 is an optimal performance, quartz reinforced rapid cure grout designed to pitch and fill concrete surfaces where drainage and/or resurfacing concrete is required.

ARC FCS301 is two (2) times stronger than concrete and used to create required pitch drainage in floor applications or where severe chemical or mechanical damage requires rebuilding prior to top coating. FCS310 is user friendly and can be overcoated with most ARC Composite Coatings for improved mechanical and chemical exposures.

• Trowelable at thickness as low as 1/2 inch (12 mm) and as high as 4 inches (10 cm)
• Compacts and trowels easily
• Can accept foot traffic in as little as 5 hours
• 100 % Solids, no shrinkage during cure
• Two times stronger than concrete

Typical applications include:

• Curbs and pads
• Spall repair
• Equipment bedding
• Rebuilding low points
• Pitch to drain
• Underlayment for epoxy topcoat
• Trench forming
• Column supports

For maximum service temperature view/download ARC FCS301 Product Data Sheet.