A.W. Chesterton
INDUSTRIES
My Chesterton
 »  Home
Hide Left Menu Hide Process Description Hide Process Image Hide Process Products
 

Stock Preparation
Stock Preparation Process: Stock preparation is conducted to convert raw stock into finished stock (furnish) for the papermachine. The pulp is prepared for the paper machine including the blending of different pulps, dilution and the addition of chemicals. The raw stocks used are the various types of chemical pulp, mechanical pulp, and recovered paper and their mixtures. The quality of the finished stock essentially determines the properties of the paper produced. The main steps in stock preparation are Pulping Beating or Refining Wet End Additives Metering and Blending

Stock preparation is conducted to convert raw stock into finished stock (furnish) for the papermachine. The pulp is prepared for the paper machine including the blending of different pulps, dilution and the addition of chemicals. The raw stocks used are the various types of chemical pulp, mechanical pulp, and recovered paper and their mixtures. The quality of the finished stock essentially determines the properties of the paper produced. The main steps in stock preparation are Pulping Beating or Refining Wet End Additives Metering and Blending  
Locate a dist
Tech support / Request Price
Process Related Products
ARC Composites
Use Product Description
Centrifuges ARC 855 a.k.a. Cleaners 
Hydropulper Frothing Cells ARC 855  
Hydropulper Frothing Cells ARC 890  
Hydropulper Frothing Cells ARC 897  
Hydropulper Frothing Cells ARC BX1  
Hydropulper Frothing Cells ARC MX1  
Refiners ARC 897  
Mechanical Packing
Use Product Description
Dye Handling Equipment 1730 Mill Pack™  
Pulp 1730 Mill Pack™ Use with Spiraltrac P 
Pulper Stock Pump 1830 Packing Use with Spiraltrac P 
Refiners 1730 Mill Pack™ Use with Spiraltrac P 
Refiners 1730-SC Pump Packing Use with Spiraltrac P 
Mechanical Seals
Use Product Description
Dyes S20 Dual Cassette Seal Use SC/SC-SC/CB - AFL with Plan 53/54 
Pulp 442 Split Seal Use SC/SC AFL with Plan 33 
Pulp S10 Cassette Seal Use SC/SC AFL with Plan 33 
Stock pumps 180 Use SC/SC AFL with Plan 33 
Technical Products
Use Product Description
Equipment (all types) 740 Heavy Duty Rust Guard  
Man Holes 860 Moldable Polymer Gasketing  
Threaded assemblies 725 Nickel Anti-Seize Compound  
Threaded assemblies 785 Parting Lubricant  
Process Related Product Case Histories
Case History Report:
CHS20070911-0002

442 seal with SC/SC
Equipment: Other  Fan Pump

Problem: Heavy maintenance and sleeve wear. Previously installed packing would last 2-4 months with sleeve replacement required every 1- 1.5 years.
Case History Report:
CHS20070524-0006

442 Split Seal in Pulp and Paper
Equipment: Other  Fan Pump

Problem: Heavy maintenance and sleeve wear. Previously installed Mechanical Packing was lasting 2-4 months, with sleeve replacement every 1- 1.5 years.
Case History Report:
CHS20071001-0004

Pulp & Paper Industry - stock preperation

Problem: Problems were leakage into gear box, oil contamination, and poor reliability.
Case History Report:
CHS20071009-0001

221 Split Seal on Bottom Entry Pulper
Equipment: BELOIT  5 TON BOTTOM ENTRY PULPER

Problem: Previous meantime between failure with mechanical packing was 4 months. Problems included leakage into gear box, oil contamination, and poor reliability.
Case History Report:
CHS20071008-0003

Pulp & Paper Stock Preparation
Equipment: DIP  Pulper

Problem: Meantime between failure was 3 months with the previously installed packing . The customer reported problems with leakage into gear box and bearings, oil contamination and poor reliability.
Case History Report:
CHS20070919-0001

Hydropulper
Equipment: Other  HYDROPULPER

Problem: Previous meantime between failure was 4 months. Leakage into gear box, oil contamination, and poor reliability.
 
MSDS Locator |  Distributor Locator |  Employment Opportunities |  Contact Us |  Privacy Policy/Terms of Use |  Legal |  Events |  Training
Copyright © 1997 - 2009 A.W. Chesterton. All rights reserved.
link